| Model Heli Services stock a selection of nicads from Sanyo, Irvine and Futaba
to suit most modelling applications. Battery packs are availabe in capacities from
600mAh to over 2000mAh. We also carry lead acid batteries from 2V
for glow plug applications to 12V for starter motors. In addition
to the standard mains powered battery chargers we also stock 240V
multichargers and 12V fastchargers. Most connectors, charging
leads, conversion leads, battery dischargers and other electrical
components are also available. A selection of batteries and Chargers are
detailed below. The Ripmax and Irvine catalogues detail many of the available options. Contact Model heli services if you have any queries
on our stock. |
|
Pro-Peak Multi Charger
|
|
Features
- AC220/230v input voltage
- 6 in 1 charger can charge several packs at the same
time
- Link outputs to use two or more outputs at the same
time as long as combined output is less than 990mAHh
- Outputs:- 30mA, 70mA, 70mA, 120mA, 120mA, 200mA
- Auto cut-off
- Led display
|
|
|
Pro- Peak Multi Charger
Price |
|
SPEED one Peak
Charger
|
|
Features
- DC12v input voltage
- Delta peak cut off
- Auto trickle charge
- Fast charge 4-8 cell packs with a capacity between
270mAh and 4000mAh
- Charge rate 1-5 amps
- Reverse polarity protection
- Fused AC input/Dc Output
|
|
|
SPEED one Peak Charger
Price |
|
Pro-Peak Fast Charger
|
|
Features
- AC220/230v and DC12v input voltage
- Delta peak cut off
- Auto trickle charge
- Fast charge 7.2-8.4v NiCad packs
- Slow charge 7.2-9.6v NiCad packs
- Audible Error alarms for
- Output disconnection
- NiCad short circuit
- Auto shut down
- Reverse polarity protection
- Fused AC input/Dc Output
|
|
|
Pro- Peak Fast Charger
Price
|
|
Robbe Power Peak 3
Combined Fast charger &
Discharger
|
|
Features
- DC12v input voltage
- Delta peak cut off
- Reverse polarity protection
- Fast charge 5-7 cells at 1-5 Amps
- Discharger (1 Amp)
- Adjustable pulse frequency
- Displays Capacity, voltage
|
|
|
Power Peak 3
Price |
|
|
|
