Rathnew Scientific Ltd 

Special Offers !

Portable MTR110 Surface Roughness Tester                          

• Back-light LCD
• Dynamic test display: progress of cut-off length during testing
• Tracing length: 6mm
• Measures Ra 0.05 - 15.0μm & Rz 0.10 - 50μm
• Cut offs: 0.25mm, 0.8mm, 2.5mm
• Tracing speed 1mm/sec
• Li-ion rechargeable batteries
• Protection slide on pick-up
• Auto power off after 90 secs
• Sound signal for start test ready
• Pocket sized, ideal for rapid, on-the-spot measurements
• Dimensions 102 x 70 x 22mm.   Weight 180g

MTR110 Surface Roughness Tester Special Offer Price:-

(Price does not include VAT, carriage is extra)

Special Offers !

Vibration Analyser Vibropen TV200       

Used for predictive maintenance of machinery, enables quick checking of unbalance, mis-alignment of bearings, shafts & gears etc.

• Handy, battery operated instrument
• Hold value after each test
• Large easy to read 4 digit LCD display
• Measurement range: RMS vibration velocity 0.1 - 199.9cm/s
• Frequency range: 10Hz - 1kHz
• Auto switch off
• Low battery warning
• Supplied with calibration certificate

Vibropen TV200 Vibration Analyser Special Offer price:-

(Price does not include VAT, carriage is extra)

Special Offers !

Portable Hardness Tester TH-170 Impact D       

• Dynamic rapid test (Leeb principle)
• Can be used at any angle, even upside down
• Large easy to read LCD display
• Displays Rockwell HRB, HRC, Vickers HV, Brinell HB, Shore HS, HL
• Easy to use & gives highly repeatable results
• Memory up to 270 readings in 9 groups
• Conforms to ASTM A 956
• Supplied with test piece
• RS232 Data output

Portable Hardness Tester TH-170 Impact D Special Offer price:-

(Price does not include VAT, carriage is extra)

Special Offers !

Ultrasonic Wall Thickness Gauge TT100 - TT130

Used for measuring wall thickness of vessels, pipes etc. Can be used on metal, glass, & plastics.

• Handy, battery operated instrument
• Includes standard 5Mhz probe
• 5 preset sound velocity values
• Retains last 10 readings
• Large easy to read  4 digit LCD display
• Integrated steel calibration plate 4mm
• Range (steel): 1.2 - 225.0mm
• Resolution: W-TT100  0.1mm, W-TT130  0.01mm
• Sound velocity range: 1,000 - 9,999m/s
• Continuous operation time: 250hrs
• Complete with carry case & ultrasonic couplant fluid

Ultrasonic Wall Thickness Gauge Special Offer price:-

(Price does not include VAT, carriage is extra)

Special Offers !

Shore Scale Analogue Durometer

Used for hardness testing of rubber, plastics, resins etc.

• Fast to use & easy to read
• Hand-held operation
• Can be used with optional bench stand
• Available in either Shore "A" or Shore "D" scale
• Supplied with setting / reference block
• Supplied with UKAS Calibration certificate

Shore Scale Analogue Durometer Special Offer price:-

(Price does not include VAT, carriage is extra)

Send mail to andrew@rathnewscientific.com with questions or comments about this web site.
Copyright © 2002 - 2004 Rathnew Scientific Ltd
Last Modified: 24-10-06