Gaskets and seals.

Gaskets and seals.

GASKETS AND SEALS TOP END FOR BROS NT400J.

Description. (Quantity required). Current part number. Price in Euro, excl. VAT.
Rocker cover rubber gasket. (2). 12391-MF5-750 12.50
Cylinder head gasket. (2). 12251-KW0-721 18.00
Cylinder base gasket. (2). 12191-MN8-003 6.00
Valve stem seal, inlet and exhaust. (6). 12208-413-003 6.50
Exhaust manifold gasket, front. (1). 18291-MM5-860 2.00
Exhaust manifold gasket, rear. (1). 18291-MN4-920 2.00
Water pipe seal, 16 mm. (2) 91315-MN8-000 2.00
Water pipe seal, 28 mm, metal pipe from water pump. (1) 91316-MN8-000 2.00
O-ring, front cylinder water pipe. (1). 91356-169-003 2.00
O-Ring, joint tube between cylinders, 18mm × 2.6mm, (2). 91306-KK4-003 2.50

Description. (Quantity required).	Current part number.	Price in Euro, excl. VAT.
Rocker cover rubber gasket. (2).	12391-MF5-750	12.50
Cylinder head gasket. (2).	12251-KW0-721	18.00
Cylinder base gasket. (2).	12191-MN8-003	6.00
Valve stem seal, inlet and exhaust. (6).	12208-413-003	6.50
Exhaust manifold gasket, front. (1).	18291-MM5-860	2.00
Exhaust manifold gasket, rear. (1).	18291-MN4-920	2.00
Water pipe seal, 16 mm. (2)	91315-MN8-000	2.00
Water pipe seal, 28 mm, metal pipe from water pump. (1)	91316-MN8-000	2.00
O-ring, front cylinder water pipe. (1).	91356-169-003	2.00
O-Ring, joint tube between cylinders, 18mm × 2.6mm, (2).	91306-KK4-003	2.50

GASKETS AND SEALS BOTTOM END FOR BROS NT400J.

Description. (Quantity required). Current part number. Price in Euro, excl. VAT.
Right crankcase cover gasket (clutch). (1). 11394-MV1-850 11.00
Left crankcase cover gasket (alternator). (1). 11395-MM9-850 9.00
PKG (gasket), oil strainer, (1). 15154-425-000 5.00
Gasket, water pump cover, (1). 19226-MM9-000 3.00
Clutch arm-rod oil seal, 12mm × 18mm × 5mm, (1). 91204-KK0-003 4.00
Oil orifice O-ring, right crankcase, 7.7mm × 2.5mm, (1). 91303-428-003 2.50
Oil seal, left crankcase, (countershaft???), 25mm × 45mm × 7mm, (1). 91201-MM9-003 4.50
Oil seal, left crankcase, (gear change shaft???), 12.5mm × 25mm × 8mm, (1). 91204-425-003 6.50
O-ring, oil jets, right crankcase, 5mm × 1.7mm, (2). 91305-MG7-003 2.50
Rubber setting, rocker cover bolt, (4). 90542-MB0-000 2.00
O-ring, oil pump collar, 14.8mm × 2.4mm, (2). 91356-MA6-005 2.50
O-ring, oil pump, pressure relief vlave, 14.8mm × 2.2mm, (1). 91313-MG7-004 3.00
O-ring, oil pump pipe, (2). 91315-MF5-003 3.50
O-ring, oil pump pipe, 13mm × 2.5mm, (1). 91319-300-000 5.50
O-ring, starter motor, 24.4mm × 3.1mm, (1). 91312-MG7-003 4.50
O-ring, starter motor, 32.95mm × 2.62mm, (1). 91302-MB0-013 3.00

Description. (Quantity required). Current part number. Price in Euro, excl. VAT.
Carburettor insulator, AKA: inlet rubber, AKA: carb holder, (2). 16211-MAW-600 21.50

Description. (Quantity required).	Current part number.	Price in Euro, excl. VAT.
Right crankcase cover gasket (clutch). (1).	11394-MV1-850	11.00
Left crankcase cover gasket (alternator). (1).	11395-MM9-850	9.00
PKG (gasket), oil strainer, (1).	15154-425-000	5.00
Gasket, water pump cover, (1).	19226-MM9-000	3.00
Clutch arm-rod oil seal, 12mm × 18mm × 5mm, (1).	91204-KK0-003	4.00
Oil orifice O-ring, right crankcase, 7.7mm × 2.5mm, (1).	91303-428-003	2.50
Oil seal, left crankcase, (countershaft???), 25mm × 45mm × 7mm, (1).	91201-MM9-003	4.50
Oil seal, left crankcase, (gear change shaft???), 12.5mm × 25mm × 8mm, (1).	91204-425-003	6.50
O-ring, oil jets, right crankcase, 5mm × 1.7mm, (2).	91305-MG7-003	2.50
Rubber setting, rocker cover bolt, (4).	90542-MB0-000	2.00
O-ring, oil pump collar, 14.8mm × 2.4mm, (2).	91356-MA6-005	2.50
O-ring, oil pump, pressure relief vlave, 14.8mm × 2.2mm, (1).	91313-MG7-004	3.00
O-ring, oil pump pipe, (2).	91315-MF5-003	3.50
O-ring, oil pump pipe, 13mm × 2.5mm, (1).	91319-300-000	5.50
O-ring, starter motor, 24.4mm × 3.1mm, (1).	91312-MG7-003	4.50
O-ring, starter motor, 32.95mm × 2.62mm, (1).	91302-MB0-013	3.00