|
|
|
- An excellent heavy duty
band saw for production runs with a large rugged high grade cast
iron saw bow, capable of handling a 250mm (10") round, 230mm
(9") square
- The idler wheel assembly has dovetail guide and incorporates
spring loaded saw tensioning device with toggle. The dovetail
arm guide is also created as part of the saw bow for minimizing
cutting vibration and maximizing the life of saw blade.
- Easy operation control panel mounted at the top of saw bow.
- At the end of a cut, the stock automatically back off the blade
slightly to allow the blade, at its lowest position, to clear
the work on its return to starting position. This special feature
prevents tooth deformities by eliminating this undesirable abrasion
and crimping.
- Additional features include a large chip pan, a preset piece
counter with automatic power off.
Model | AH - 260 C | SH - 260 C | |||
Max. Capacity | round | 260mm (10") | |||
square | 230W x 230Hmm (9"W x 9"H) | ||||
rectangular | 280W x 230Hmm (11"W x 9"H) | 280W x 230Hmm (11"W x 9"H) | |||
Saw blade | Speed | 60 Hz | 21, 38, 55, 68, 81m/min (70, 127, 180, 224, 267 fpm) | ||
50 Hz | 17, 31, 46, 56, 67 m/min (58, 105, 150, 187, 222 fpm) | ||||
Size | 25W x 3660L x 0.9Tmm (1"W x 144"L x 0.035"T) | ||||
Motor output | Hydraulic | 1/4 HP (0.188 KW) | |||
Saw blade | 2 HP (1.5 KW) | ||||
Coolant pump | 1/8 HP (0.1 KW) | ||||
Vise roller | 1/4 HP (0.188 KW) | ||||
Coolant tank | 40 L (10 gal.) | ||||
Hydraulic tank | 15 L (3.7 gal.) | ||||
Height of work bed | 750mm (29.5") | ||||
Net Weight | 550 kgs (1210 Lbs) | 500 kgs (1100 Lbs) | |||
Gross Weight | 700 kgs (1540 Lbs) | 650 kgs (1430 Lbs) | |||
Floor Space | L x W x H | 1905 x 2159 x 1320 mm (75" x 85" x 52") | |||
Shipping Space | L x W x H | 1905 x 864 x 1524 mm (75" x 34" x 60") |
Standard accessories : For AH-260C & SH-260C - Adjustable material stop - Complete coolant system - Chip brush & wiper - Tool kits with box - Operation & parts book For AH-260C only: - Nesting fixture (L type) - Auto stop piece counter - Out of stock switch - Blade breakage detector - Cleaning gun |
Optional accessories : - Non-step variable speed device - Roller table (IM or 2M) - Clamping device for short piece - Hydraulic taking roller - Vertical clamping roller - Front supporting roller - Additional saw blade - Additional brush |