|
|
|
Using direct
current motor in variable speed Compact it construction, convenient in operation It can turn shafts, sleeves, plates, taper workpieces, and kinds of metric or inch threads Can be used in manufacturing, maintaining and repairing at home workshop, instrument industries, laboratories and research institutes. |
RUN - 7" x 10" |
Run - 9" x 20" |
The bedway is hardened
and ground It features with super pome accuracy and well wear resisting. The main spindle is mounted on 2 precision accuracy taper roller bearings. Changing speeds by belt the machine can operate at low noise. An overload clutch is engaged at 130rpm, operating speed in case an accident happens. |
| Models | RUN - 7" x 10" | RUN - 9" x 20" |
| Max. swing over bed | 180mm (7") | 230mm (9 1/16") |
| Max. swing over cross slide | 90mm (3 1/2") | 130mm (5 1/5") |
| Max. length of workpiece | 200mm (7 1/3") | 500mm (19 1/16") |
| Max. length of turning | 127mm (5") | 420mm (16 17/32") |
| Hole through spindle | 20mm (3/4") | 20mm (3/4") |
| Taper or spindle bore | M.T.No.3 | M.T.No.3 |
| Speed range of spindle | 200-2800 rpm | 130-2000 rpm (60hz) |
| (variable speeds) | 100-1800 rpm (50hz) | |
| Longitudinal feed (imperial) | 0.005"-0.0069" | |
| Longitudinal feed (metric) | 0.127mm-0.177mm | |
| Inch threads can be cut | 12-52 T.P.I | 8-56 T.P.I. |
| Metric threads can be cut | 0.5-2.5 mm | 0.5-3 mm |
| Dia. of tailstock sleeve | 22mm | 26mm (1") |
| Taper of quill sleeve | M.T.NO.2 | M.T.No.2 |
| Max. travel of tailstock sleeve | 40 mm (9/16") | 40mm (9/16") |
| Motor horse power | 1/2 HP (375 W) | 3/4 HP (550 W) |
| Net weight | 31 kgs (no stand) | 95 kgs (w/o stand) |
| Gross weight | 35 kgs (no stand) | 120 kgs (w/o stand) |
| Floor space dimensions (w/o stand) | 650 x 300 mm | 950 x 500 mm |
| Packing size L x W x H (w/o stand) | 680 x 320 x 320 mm | 1040 x 560 x 520 mm |
| Packing size for 9" x 20" stand 2/case | none | 780 x 480 x 320 mm |
| Standard accessories | Special accessories | |
| RUN-7" x 10" | RUN-9" x 20" | RUN-7" x 10" |
| 80mm 3-jaw chuck & blackplate | 100mm 3-jaw chuck & blackplate | CE electrical switch |
| Opening wrench (14-17mm) 3pcs | Center M.T.#3, M.T.#2 one each | |
| Hexagon socket head drive 4pcs (3,4,5 & 6 mm) | Change gears for imperial & metric M=1, Z=30 (2 pcs), 36, 42, 45 & 80 | RUN-9" x 20" |
| Oil gun | Tool post special wrench 1pc | 120mm 4-jaw chuck & blackplate |
| Thread dial | Hexagon Socket Head Drive 5rive 5pcs | Steady rest |
| Center & 5A fuse one each | Drive (+)3", (-)3" one each | Follow rest |
| Motor 1/2 HP (375 W) | Opening wrench 8mm - 10mm 3pcs | 190mm Faceplate |
|
Change gear Imperial M=1, Z=30, 35, 40 (2pcs), 40, 55, 57, 60, 65 & 40 Metric M=1, Z=30, 35, 40 (2pcs), 40, 50, 55, 60 (2pcs), 65 |
Chip tray | Rear Splash Faceplate |
| Thread dial | Combined stand | |
| Oil gun | CE electrical switches | |
| 4-way tool post | Four way tool Post | |
| Chip tray & rear splash guard | Motor 3/4 HP (500 W) | |
