 |
|
|
|
|
| Models | RUN - 13 x 25 BH | RUN - 13 x 36 BH | RUN - 13 x 40 BH | RUN - 13 x 25 GH | RUN - 13 x 40 GH | RUN - 330 x 630 RR | RUN - 330 x 1000 RR | |
| Capacity & Dimensions | Swing over Bed | 330 mm (13") | 330 mm (13") | 330 mm (13") | ||||
| Swing over cross slide | 198 mm (7-25/32") | 198 mm (7-25/32") | 198 mm (7-25/32") | |||||
| Swing in gap diameter | 476 mm (18-3/4") (optional) | 476 mm (18-3/4") (optional) | 476 mm (18-3/4") (optional) | |||||
| Swing in length | 210 mm (8-1/4") (optional) | 210 mm (8-1/4") (optional) | 210 mm (8-1/4") (optional) | |||||
| Center height | 166 mm (6-1/2") | 166 mm (6-1/2") | 166 mm (6-1/2") | |||||
| Admits between | 635 mm (25") | 915 mm (36") | 1016 mm (40") | 635 mm (25") | 1016 mm (40") | 635 mm (25") | 1016 mm (40") | |
| Bed width | 187 mm (7-3/8") | 187 mm (7-3/8") | 187 mm (7-3/8") | |||||
| Bed length | 1248 mm (49-1/8") | 1535 mm (60-1/8") | 1655 mm (65-1/8") | 1248 mm (49-1/8") | 1655 mm (65-1/8") | 1248 mm (49-1/8") | 1655 mm (65-1/8") | |
| Bed height | 290 mm (11-13/32") | 290 mm (11-13/32") | 290 mm (11-13/32") | |||||
| Headstock | Spindle bore | 39 mm (11-13/32") | 38 mm (11-13/32") | 38 mm (11-13/32") | ||||
| Spindle nose | A.S.A.M. Type, 2-1/4"-8T.P.I. | D1-4" or A2-4" | D1-4" or A2-4" | |||||
| Taper in nose | NO. 5 morse | NO. 5 morse | NO. 5 morse | |||||
| Taper in sleeve | NO. 3 morse | NO. 3 morse | NO. 3 morse | |||||
| Speeds number | 12 | 8 or 16 (pole changeable motor) (optional) | 8 or 16 (pole changeable motor) (optional) | |||||
| Speeds range | 60-1240 rpm |
70-2000 rpm or 35-2000 rpm (2 speed motor) |
70-2000 rpm or 35-2000 rpm (2 speed motor) |
|||||
| Carriage & compound | Cross slide width |
118 mm (4-5/8)" or 130 mm (5-1/8") (optional) |
118 mm (4-5/8)" or 130 mm (5-1/8") (optional) |
130 mm (5-1/8") | ||||
| Cross slide travel | 160 mm (6-5/16") | 160 mm (6-5/16") | 160 mm (6-5/16") | |||||
| Compound rest width | 76 mm (3") or 82 mm (3-15/16") |
76 mm (3") or 82 mm (3-15/16") |
82 mm (3-15/16") | |||||
| Compound rest travel | 68 mm (2-11/16") or 92 mm (3-5/8") | 68 mm (2-11/16") or 92 mm (3-5/8") | 92 mm (3-15/16") | |||||
| Lead screw diameter | 22 mm (7/8") | 22 mm (7/8") | 22 mm (7/8") | |||||
| Lead screw thread | 8 T.P.I. or 3 mm pitch | 8 T.P.I. or 3 mm pitch | 8 T.P.I. or 3 mm pitch | |||||
| Feed rod diameter | 19 mm (3/4") | 19 mm (3/4") | 19 mm (3/4") | |||||
| Cutting tool max section | 16 mm x 16 mm (5/8" x 5/8") | 16 mm x 16 mm (5/8" x 5/8") | 16 mm x 16 mm (5/8" x 5/8") | |||||
| Threads & feeds | Threads imperial pitches | 40 Nos. 4-112 T.P.I. | 40 Nos. 4-112 T.P.I. | 36 Nos. 8-112 T.P.I. or (34 Nos. 4-56 T.P.I.) | ||||
| Threads metric pitches | 23 Nos. 0.25-11 mm pitch | 23 Nos. 0.25-11 mm pitch | 28 Nos. 0.2-5 pitch or (26 Nos. 0.4-7 mm pitch) | |||||
| Threads diametral pitches | 23 Nos. 8-224 D.P. | 23 Nos. 8-224 D.P. | 36 Nos. 8-112 D.P. | |||||
| Threads module pitches | 15 Nos. 0.25-3 M.P. | 15 Nos. 0.25-3 M.P. | 22 Nos. 0.2-3 M.P. | |||||
| Longitudinal feeds imperial | 40 Nos. .0036-0.1005"/rev | 40 Nos. .0036-0.1005"/rev | 36 Nos. .0019-0.0273"/rev or (32 Nos. 0.002-0.548"/rev) | |||||
| Longitudinal feeds metric | 40 Nos. .0091-2.553mm/rev | 40 Nos. .0091-2.553mm/rev | 36 Nos. .0050-0.696mm/rev or (32 Nos. 0.052-1.392mm/rev) | |||||
| Cross feeds imperial | 40 Nos. .0012-0.0345"/rev | 40 Nos. .0012-0.0345"/rev | 36 Nos. .0006-0.0094"/rev or (32 Nos. 0.0007-0.0187"/rev) | |||||
| Cross feeds metric | 40 Nos. .0025-0.690mm/rev | 40 Nos. .0025-0.690mm/rev | 36 Nos. .0013-0.188mm/rev or (32 Nos. 0.014-0.380mm/rev) | |||||
| Tailstock | Quill diameter | 32 mm (1-1/4") | 32 mm (1-1/4") | 42 mm (1-21/32") (NO.3 M.T.) | ||||
| or (optional) | 42 mm (1-21/32") (NO.3 M.T.) | 42 mm (1-21/32") | ||||||
| Quill travel | 100 mm (3-15/16") | 100 mm (3-15/16") | 114 mm (4-1/2") (NO.3 M.T.) | |||||
| or (optional) | 114 mm (4-1/2") (NO.3 M.T.) | 114 mm (4-1/2") | ||||||
| Quill taper | NO.2 morse | NO.3 morse | ||||||
| or (optional) | NO.3 morse | NO.3 morse | ||||||
| Set over | 10mm (±3/8") | 10mm (±3/8") | 10mm (±3/8") | |||||
| Motor | For main motor | 2 HP, 3 PH | 2 HP, 3 PH | 3 HP, 3 PH | ||||
| or | 2 HP, or 1-1/2 HP, 1 PH (optional) | 2 HP, or 1-1/2 HP, 1 PH (optional) | (optional) 2 HP, 1 PH or 3 PH pole changeable | |||||
| For coolant pump | 1/8 HP, or 3-PH or 1 PH | 1/8 HP, or 3-PH or 1 PH | 1/8 HP, or 3-PH or 1 PH | |||||
| Weight (kg) & measures | Machine length | 1505 mm (59-1/4") | 1795 mm (70-5/8") | 1915 mm (75-3/8") | 1533 mm (60-3/8") | 1940 mm (76-3/8") | 1533 mm (60-3/8") | 1940 mm (76-3/8") |
| Machine width | 750 mm (29-1/2") | 750 mm (29-1/2") | 750 mm (29-1/2") | 750 mm (29-1/2") | 750 mm (29-1/2") | 755 mm (29-3/4") | 755 mm (29-3/4") | |
| Machine height (w/o stand) | 570 mm (22-1/4") | 570 mm (22-1/4") | 570 mm (22-1/4") | 635 mm (25") | 635 mm (25") |
1238 mm (48-3/4") (with stand) |
1238 mm (48-3/4") (with stand) |
|
| 1 set/case (L x H x W) | 62" x 30" x 31" | 74" x 30" x 31" | 76" x 30" x 31" | 62" x 30" x 31" | 76" x 30" x 31" | |||
| Bench lathes | NW: 330 GW: 410 | NW: 350 GW: 435 | NW: 385 GW: 475 | NW: 360 GW: 440 | NW: 410 GW: 505 | |||
| 1 set/case (L x H x W) | 62" x 30" x 57" | 74" x 30" x 57" | 76" x 30" x 57" | 62" x 30" x 57" | 76" x 30" x 57" | 62" x 30" x 57" | 76" x 30" x 57" | |
| With stand | NW: 460 GW: 550 | NW: 485 GW: 580 | NW: 550 GW: 650 | NW: 490 GW: 600 | NW: 580 GW: 680 | NW: 530 GW: 650 | NW: 610 GW: 740 | |
| 2 sets/case (L x H x W) | 62" x 50" x 31" | 74" x 50" x 31" | 76" x 50" x 31" | 62" x 50" x 31" | 76" x 50" x 57" | |||
| Bench lathe | NW: 660 GW: 780 | NW: 700 GW: 835 | NW: 770 GW: 905 | NW: 720 GW: 850 | NW: 830 GW: 970 | |||
| 2 sets/case (L x H x W) | 62" x 50" x 57" | 74" x 50" x 57" | 76" x 50" x 57" | 62" x 50" x 57" | 76" x 50" x 57" | 62" x 50" x 57" | 76" x 50" x 57" | |
| With stand | NW: 920 GW: 1050 | NW: 970 GW: 1110 | NW: 1100 GW: 1245 | NW: 980 GW: 1140 | NW: 1160 GW: 1280 | NW: 1060 GW: 1210 | NW: 1220 GW: 1400 | |