HOME ABOUT DIVISIONS PROJECTS CONTACT US

 

Varied arrays of projects have been completed in the areas of
  • Construction (On-Site)
  • Stainless & Mild Steel
  • Piping
  • Process Engineering
 
Brief descriptions of some of the projects recently completed or currently in hand by Samco Engineering Limited are detailed below. An enlarged picture can be obtained by Clicking on the pictures below. Should you require more information on the projects below, please don't hesitate to contact us.

 

Construction Projects

More pictures for the recently completed Pierse Project and the P.J. Walls Cladding Projects can be seen by following the two links below

 Pierse Project Gallery Cladding Gallery.htm

 

Pierse - Blackrock Development Sign

August 2005 - Manufacture, Supply and Install, 2no 16' x 12', 3 legged sign post for the Residential Development at Blackrock.

Pierse - Marketing Suite

August 2005 - Manufacture, Supply and Install, the all the steelwork for the marketing suite of the Pierse Blackrock (Cork) Residential Development. For more pictures of this project go to Project Gallery Section

 

PELLICOLOUR -PJ WALLS

At the UCC Medical Nursing Therapies & Creche Site in Cork, Samco Engineering On site services division installed the Tregral Pellicolour cladding to the exterior of the building

FLOORFORGE - PJ WALLS

At the UCC Nursing Therapies & Creche Site in Cork, Samoc Engineering Manufactured Supplied and Installed the floorforge to the exterior of the building

Sound Proof Cladding - DAIRYGOLD

To reduce the decibel level of the cheese plant in Dairygold, Samco Engineering erected an acoustic panelled enclosure around the plant.

Chimney Stacks - GALTEE FOODS

Design, Manufacture, Supply and Installation of three chimney stacks at Galtee Foods in Mitchelstown

Access Platform - GALTEE FOOD

Manufacture, Supply and install an access platform to the roof of the cooling tower at Galtee Foods in Mitchelstown

Automatic Sercuity Gate

Manufacture, Supply & Installation of Radio Controlled Automatic Security Gate and perimeter fencing

Industrial Unit

Design, Manufacture & installation of a 8,000 square foot industrial unit at the site of Samco Engineering

 

Stainless & Mild Steel Projects

 

MILD STEEL SILO 120 ton

Design, Fabricated and prime coated & painted by Samco was a custom made 120 ton vertical M/S Silo

FILTRATION VESSEL

Design, Fabricated and prime coated by Samco was a custom made 20,000 litre flitration Vessel & the associated supporting steelwork frame

Sediment Tank

Design, Fabricated and Prime coated by Samco was a custom made sediment tank

MILD STEEL Silo 120 ton

Design, Fabricated and prime coated by Samco Engineering was a custom made 120 ton vertical mild steel Silo

MILD STEEL Fly Ash Silo 50 ton

Design, Fabricated and prime coated by Samco Engineering was a custom made 50 ton vertical mild steel Silo for the collection of Fly Ash

Vacuum Meat Massagers

Samco Engineering Designed, manufactured & installed a set of Vacuum Meat Massagers at the Galtee Foods plant in Mitchelstown

 

 

 

Piping Projects

 

Oven Piping Network

Design, fabricated and installed the steam supply piping network to cooking ovens and the associated piping layout. At Samco Engineering we are able to design and install custom made ovens and associated parts to suit your requirements

Boiler, Tank & Piping

Samco Engineering designed, fabricated and installed the hot water boiler, storage tanks and piping network for Horgan’s delicatessen.

Fogging System - HORGANS

Samco Engineering undertook the design, fabrication and installation of a fogging disinfectant mixing tank as well as installing the associated piping layout and control panel.

Automatic Sink dispensor unit

Samco Engineering designed and fabricated an automatic wall mounted sink unit; complete with disinfectant and soap dispensor units which are automatically controlled by a fitted motion sensor. These units are used on the factory floor of Horgan’s delicatessen

POWER WASHER

Samco Engineering Installed a Rotary Jet pump capable of providing water at 900PSI to 15 laces for a power-washer system at Galtee Foods

 

 

Process Engineering Projects

Conveyor Systems

Automatic Tray Elevator - GALTEE

This project involved the design, fabrication and installation of an automatic tray elevator with a capacity of 40 ton per day usage.

Boning Convery System

This project involved the design and fabrication of an “online” boning conveyor system with automatic tray feed conveyor at Galtee Foods in Mitchelstown.

Inclined Converyor System

Samco Engineering designed, fabricated and installed an inclined tray lift conveyor with a 50 ton per day capacity.

pneumatic meatpacking machine

Samco Engineering designed and fabricated a pneumatic meatpacking machine. This machine had the design purpose of filling the meat in to plastic liners through the use of a pneumatic ram.

Stainless Steel Moulds

Also designed and manufactured at the Samco engineering workshop for Dairygold was a set of meat moulds.