:: Tiling Tips Make sure you have enough tiles to finish the job before starting to tile. More tiles may not always be available. Plan your layout. Avoid small or narrow cuts where possible. Plan how one area may flow on from another. The first tile put down determines where every other tile will go. Make sure you are tiling onto a rigid surface that is flat, dry and dust free. Timber floors may need over-sheeting with cement fibre board before tiling. Always waterproof showers and wet areas before you tile them as tile installations do not act as a 100% moisture barrier. When using sealers and cleaners always test a small area first to determine the results. Keep spares for any future repairs. If you have spares, tiles are very easy to repair. Always work from multiple boxes of tiles to insure a good blend of shadings. Colour variation is a natural feature of ceramic tiles and other fired products, enjoy it. Read instructions on all adhesives, grouts, sealers & other items before starting. Ask your retailer questions if you have any doubts. Silicone corner joints and where tiles meet skirting and other materials to allow for any movement and temperature contractions and expansions. Clean any glue or grout off tiles BEFORE it dries. Change your cleaning water often so less residue is left. Stay off tiles until glue/grout has properly dried.