|
Model Heli Services stock 30 sized helicopters to suit beginners, the more
experienced helicopter pilot and the competition flyer. For the Scale pilot we have Scale Fuselages and Canopies to suit most helicopter
mechanics. We also stock Quick Uk and NHP blades for all helicopter sizes. We have
inlcuded useful information and fitment charts for Quick UK
& NHP blades.
We offer model build/rebuild, blade balancing and first flight services if
required. Click on Services at the top of the page for more information on shop
services. We also stock from time to time a selection of quality used helicopters
which can be sold as seen or upgraded as required. Contact Model Heli Services for more
information on our stock.
See also, 46-50 size heli kits and 60 size heli kits.
|
|
JR ERGO 30 CCPM
|
|
This Helicopter uses CCPM (Cyclic/Collective Pitch Mixing) to increase rotor head
responsiveness and reduce slop in the controls. This system mounts 3 servos below the
swashplate linked directly to the swashplate. Mixing is now achieved electronically rather
than mechanically. Instead of one servo moving the collective, you now have three. Instead
of one servo moving the cyclic, you have two. This kit is upgradeable to the Ergo 46 3D
version. A computer radio with CCPM mixing is required. (eg. a recent FF6, Sanwa RD6000,
FF8, etc.) |
 
|
Engine:.30~.36
|
Ergo 30 CCPM kit
Price €
|
|
Kalt Baron 30S
|
|
The Baron 30S has been designed
to accomodate a two stroke, four stroke or electric engine. It is an ideal trainer
helicopter and requires only the correct setup to meet the needs of the 3D pilot.
The Baron 30S is a development of the earlier Baron 30. It
features a ballraced tail, collective pitch and mixing system and the bladeholder assembly
is equipped with thrust races. This helicopter is ideal for both the first time helicopter
pilot and the seasoned expert performing 3D aerobatics. |
|
Engine:.30~.36
|
Kalt Baron 30S kit
Discontinued by Kalt |
|
Hirobo Shuttle
|
|
| The Shuttle
Z-TS, designed for the first time Helicopter flyer. Very stable
flight characteristics and easy to fly, It is also fully upgradeable to ZXX and beyond. The Shuttle ZXX, totally ballraced throughout, this
heli is ideal for sport or aerobatic flying and is the ideal progression from the Shuttle
TS or Challenge. It is fully upgradeable using Hirobo upgrade parts.
The Shuttle RG, features new main mechanics, metal side frames and bearing blocks, all metal
SZ3 rotor head and tail gearbox, push/pull cyclic controls and nearly every shuttle gold
upgrade part available. |
|
Engine:.30~.36
|
Shuttle Z-TS Kit
Price €
289
Shuttle ZXX Kit
Replaced by New "Sceadu"Price € |
|
Kyosho Concept 32VR
|
|
| The Concept 32 VR incorporates features like full flapping
hinge rotor design, rigid main frame and a Concept-style layout that positions the heli's
weight more efficiently for crisper loops and snap rolls, and spectacular overall agility. |
|
Engine:.30~.36
|
Concept32 VR kit
Price € |
|
Thunder Tiger Raptor 30
|
|
| This 3-D class helicopter features a 4 point swash plate
control system to achieve extremely accurate and precise collective pitch and cyclic
control. It also features belt driven tail and Super Rigid Main Frame to accommodate the
excess stress on the main shaft, a large 10mm main shaft and a web reinforced main frame
is used to withstand the rigors of 3-D aerobatics. |
|
Engine:.30~.36
|
Unassembled Raptor30 kit (29BB)
Price €
Raptor Pro Inc. TT 36 engine (ARTF 49BB )
Price €
|
|
|
|
