The Murco IAM consists of an enclosure incorporating a sensor and monitor to detect gas leaks in an area, room, zone, airspace or airflow.

The IAM has two relays to control external equipment i.e. an air conditioning unit, and/or report to external systems. It also has a dedicated output to report to a Murco IAM Control Panel.

(IAM-C).

IAM Manual (PDF)

The IAM complies in full with EC regulation 2037/2000 and European standard EN378.

Features:

One level of alarm

• Two Relays to switch 24V at the pre-set alarm level, auto or manual reset selectable by jumper.
• Adjustable delay to avoid false alarms, selectable by jumpers - 0, 5, 10 or 15 minutes
• Local alarm indication, siren and red LED
• Siren activated or deactivated, selectable by jumper
• Mute button for siren
• Two wire signal to an optional remote Murco panel which can indicate which sensor is in alarm - 16 channels max. Up to 16 panels can be connected to another 16 channel panel allowing expansion up to 256 sensors. You can expand further by multiples of 16.

Approximate Dimensions:

87 x 147 x 61 mm (Surface Mounted Version)
87 x 147 x 29 (Recessed Version)

The IAM Control Panel (IAM-C) shows the sensors in alarm and has a mains rated relay for control purposes and has an output to connect to other panels allowing very large systems to be constructed.

The Murco IAM is designed to fit into an existing double gang wall socket (UK standard) mounting box, or surface mount.