 |
 |
     |
SECTION BENDING
|
Samco Engineering offers the rolling of structural steel members to strict tolerances to meet the customers requirements.
The Bending Service
covers all British steel sections, which can be bent in most ferrous and
non-ferrous materials. Samco Engineering quotes on:
SEE OUR SECTION BENDING CHART BELOW |
|
for our contact details to request a quote for rolling.
*** PLEASE NOTE
When requesting a quote can you please provide the following information for a more speedily response:
Item to be Rolled
Quantity
Rolling Type No.
Length of item to be rolled - please allow 0.6m at either side of the length as waste material
Inside/Outside Radius or Diameter
Material Supplied or To be Supply by SAMCO Engineering or by customer
Pickup/Delivery to be provided by SAMCO Engineering or by customer
For Unequal Angles please state which dimension is on the vertical & horizontal plane
An example Order is shown below:
Item: 150x75x15mm Unequal Angle
Qty: 1no.
Type: Type 1 - 150mm on vertical plane, 75mm on horizontal plane
Length: 6m
Radius: 1.8m inside measurement
Material: to be supplied by SAMCO Engineering
Delivery: to be provided by SAMCO Engineering
