Brief:-
I was asked to design a timber frame 200 seat restaurant which
must fulfill the following requirements.
The
design should be able to accommodate 200 people seated with a lobby/reception
area to seat a small bus load of people (30~40).
The
restaurant will be self service catering for Hot meals, cold dishes, sandwiches,
beverages and confectioneries. Appropriate space should be made for utensils.
The
Kitchen should be appropriately set up with consideration for workflow and
traffic in and out to the service counter.
The
kitchen must contain a
-
Dairy
prep area,
-
Meat
prep area,
-
Fish
prep area.
Kitchen
appliances should include
-
Grills,
-
Fryers,
-
Ovens,
-
a Range,
-
Beat
pan and
-
Boiling
pan.
Waste
disposal, dishwashing and storage must also be incorporated into the kitchen
design.
Storage
Rooms for:-
-
Dry
Goods,
-
Fresh Veg,
-
a Cold Room and
-
a
Freezer Room
must be part of the kitchen design.
Appropriate
office space for a restaurant of this size should be incorporated.
The
public toilets should include:-
For the MENS:-
-
At
least 4 WC's and 3 urinals with 4 washhand basins.
For
the LADIES:-
-
6
WC's and 4 washhand basins.
For Staff toilets/locker room the design should include:-
For the MENS:-
-
2
WC's, 3 urinals, 2 wash hand basins and an appropriate number of lockers
for the staff.
For the LADIES:-
-
2
WC's, 2 wash hand basins and an appropriate number of lockers for the
staff.
3 Showers must be provided for both male and female staff.
A
toilet for a disabled person should be included into the design.
Required
Drawings:- Links contain my designs in ACAD R14 (*.dwg) and
WHIP!(*.dwf) formats
WHIP!
Format Floor
Plan (*.dwf)
2)
Section -cross section
showing background detail such as doors windows and fittings. (*.dwg)
WHIP!
Format Section
(*.dwf)
3)
Complete set of Elevations,
typically 4 or more. (*.dwg)
WHIP!
Format
Elevations (*.dwf)
Although
it was not a requirement for this project, I had built a 3D model of the resturant
as an experiment for myself. I had not previously built a complete 3D Model
with Autocad and 3D stuidio, and I was very pleased with the results I was
able to achieve. I have slightly updated the original to remove some rough
edges and glitches, but this is essentialy my first attempt at 3D modeling.
2)
3D Studio 3D Model (3ds
v4)